Kenwood XD-772S Stereo System User Manual


 
XD-SERIES (EN/M,T)
12
Preparation section
System connection
Surround (rear) speakers
(XD-7...series only)
This switch can be used only when the separately sold
surround (rear) speakers are connected. When the
switch is set to ON, surround playback can be enjoyed.
When this switch is set to OFF, normal playback is ex-
ecuted.
÷ Please operate this switch while the power is switched
off.
÷ We recommend to keep this switch set to OFF when no
surround (rear) speakers are connected to obtain a
better sound quality.
÷ When the switch is set to OFF, no sound will come from
the surround (rear) speakers.
In regard to the SURROUND switch
123
Twist
4
Twist
Speaker Unit
Main Unit
Surround switch
Lead the 75 coaxial cable connected to the FM out-
door antenna into the room and connect it to the FM
75 termimal.
FM outdoor antenna
Use a commercially-available antenna
adapter (a small-sized model).
GND
FM
75
AM
ANTENNA
1 Select the TUNER input.
2 While holding the SELECT key depressed, turn
the SOUND CONTROL jog dial to select the
system mode.
SELECT
1 POLAR system
2 PILOT TONE system
3 Establish the selection.
Polar Pilot
Reception mode switching of FM broadcast
(For Russia)
When you want to receive an FM broadcast in PILOT
TONE mode, changing the setting as follows.
ENTER
1234
S
O
U
N
D
C
O
N
T
R
O
L
SURROUND
SPEAKERS
(
8-16
)
5
ON
OFF
SURROUND
+
-
L
R
−+−+
ª· ª·
RL
5
ON
OFF
SURROUND
(RS-N852/optional)