Filter
Top Products
36
EN
USING EXTERNAL UNITS
Video/Auxiliary (Audio signal) input
To listen to or record signals from external sources
through this unit :
1 Use a separately available RCA cord to connect
the desired external unit to the VIDEO/AUX
sockets.
(red = right channel, white = left channel)
• When using video equipment (Laser Disc player
or VCR), be sure to connect the audio output to
this unit and the video output to a television.
2 Press the ON/STANDBY button to turn the
power on.
3 Press the VIDEO/AUX button.
4 Operate the external unit.
5 To record the sound from the external unit, per-
form steps
2 - 4 of the “Recording from the
built-in radio” section on page 31.
Note :
•
To prevent hum interference, do not place this
unit near a television receiver.
Headphones
•
Before plugging in or unplugging the head-
phones, make sure the volume level is reduced.
• Be sure your headphones have a 3.5mm (1/8”)
diameter plug and are between 16 Ω and 50 Ω
impedance. The recommended impedance is
32 Ω.
• When headphones are connected, the speak-
ers are disconnected automatically. Adjust the
VOLUME CONTROL for the desired volume.
To the line output socket
RCA cord