Kenwood XD-755E Stereo System User Manual


 
16
EN
Random play
(Remote control operation)
The tracks on the disc(s) can be played in random
order automatically.
1 Load a disc(s) and close the disc tray.
2 Press the RANDOM button to begin random play.
“RDM” will light up on the display.
Notes :
If you press the P. CALL ¡ ¢ button during
random play, you can move to another track. On
the other hand, the P. CALL 4 1 button does
not allow you to move to the previous track. The
beginning of the track being played will be
located.
When using random play, be sure to press the
7 STOP button after you are through listening.
Otherwise, the disc(s) will play continuously.
In random play the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
To cancel random play :
Press the 3 button.
Tracks Skipping
Tracks skipping will automatically locate the begin-
ning of any track.
To listen again to the track being
played :
Press the P. CALL 4 1 button for less than 0.5
second during playback.
To move to the beginning of the next
track :
Press the P. CALL ¡ ¢ button for less than 0.5
second during playback.
To skip a number of tracks at one time, press
the P. CALL 4 1 or ¡ ¢ button repeat-
edly until the desired track number is shown.
To start playback from a desired track, press the
P. CALL 4 1 or ¡ ¢ button whilst in
the stop mode to select the track number, and
then press the 3 button.
Note :
Tracks skipping can only search for music on a sin-
gle disc.
3
P.CALL
4 1
¡ ¢
P.CALL
4 1 ¡ ¢
3
RANDOM
P.CALL
4 1 ¡ ¢
3
7