Kenwood XD-755E Stereo System User Manual


 
17
EN
Cue and review
1
Load a disc and begin playback.
2 Hold down the P. CALL ¡ ¢ button for audi-
ble fast forward, and hold down the P. CALL
4 1 button for audible fast reverse.
3 Normal playback will resume when the P. CALL
4 1 or ¡ ¢ button is released.
Notes :
When the end of the disc is reached whilst
cueing, “END” will appear in the display and CD
operation will be paused. (Even though the next
disc has been loaded, the disc will not be
switched.)
Press the P. CALL 4 1 button for fast re-
verse or press the 7 STOP button to stop CD
operation.
If the beginning of the disc is reached whilst re-
viewing, the mode will automatically switch to
normal playback at that point.
Repeat play
All tracks on up to 3 discs, or a programmed se-
quence can be continuously repeated.
To repeat all tracks on up to 3 discs :
Press the 3 button twice.
“RPT.” will light up on the display.
To repeat a programmed sequence :
1 Programme a sequence of up to 32 tracks.
(see page 18)
2 Press the 3 button again.
“RPT.” will light up on the display.
To cancel repeat play :
Press the 3 button again.
“RPT.” will goes off.
Note :
When using repeat play, be sure to press the
7 STOP button after you are through listening.
Otherwise, the CD(s) will play continuously.
7 STOP
7
3
3
7 STOP
P.CALL
4 1
¡ ¢
P.CALL
4 1 ¡ ¢
7