Kenwood TK-7180 Stereo System User Manual


 
15
SCAN REVERT
You can select Revert zones and channels/ group IDs using the Zone and
CH/GID keys.
The following types of Scan Reverts can be programmed by your dealer:
Last Called Revert: The last zone and channel/ group ID received is assigned as the
new revert zone and group ID.
Last Used Revert: The last zone and channel/ group ID responded to is assigned as
the new revert zone and group ID.
Selected: The last zone and channel/ group ID selected is assigned as the new revert
zone and group ID.
Selected + Talkback: If the zone and channel/ group ID has been changed during
Scan, the newly selected zone and channel/ group ID is assigned as the new revert
zone and channel/ group ID. The transceiver “talks back” on the current receive zone
and channel/ group ID.
Priority: If your dealer has programmed a Priority channel (TK-X180/ TK-X180H:
Priority 1 or Priority 2 / TK-X182/ TK-X182H: Priority), this channel is the revert zone
and channel.
Priority + Talkback: If your dealer has programmed a Priority channel (TK-X180/
TK-X180H: Priority 1 or Priority 2 / TK-X182/ TK-X182H: Priority), this channel is the
revert zone and channel. The transceiver “talks back” on the current receive zone and
channel/ group ID.
PRIORITY SCAN
A Priority channel must be programmed in order for Priority Scan to function.
The transceiver will automatically change to the Priority channel when a signal is
received on it, even if a signal is being received on a normal channel.
The indicator (TK-X180/ TK-X180H) represents the Priority 1 channel.
The
indicator (TK-X180/ TK-X180H) represents the Priority 2 channel.
The
indicator (TK-X180/ TK-X180H) represents both the Priority 1 and Priority 2
channel.
The indicator (TK-X182/ TK-X182H) represents the Priority channel.
Note: Priority cannot be programmed onto the group ID of a Trunking zone; it can be used only on
channels of Conventional zones.
GROUP SCAN
Group Scan is useful when more than one channel/ group ID is programmed in a
zone. Group Scan is set by your dealer on request. It scans the revert groups
as well as groups that are allowed to be scanned.
When a call is received, the group indicator shows the channel/ group ID, and
that group becomes the revert group. Simply press the PTT switch to respond to
the call.