Filter
Top Products
35
XD SERIES (En)
Operation
Timer programming
1
Make preparations for the play (recording).
÷ When the timer function is used for timer recording of an
input source, the speakers do not output the audio even
after the unit is turned on by the timer.
Playing or recording the auxiliary input source
Make preparations for record-
ing.
§
Make timer setting of the component connected to the AUX INPUT
jacks.
1 Select “Clock Options”.
2 Select “Timer”.
3
Select the timer operation.
2
Adjust the listening volume.
Continued on next page...
The station should be preset
prior to the above.
£
Insert a disc. (Program playback
is not possible.)
Select the disc to be played
(1, 2 or 3).
^&
Set a tape in the deck you want
to play back the tape.
¢
To listen to radio To listen to CD To listen to tape
For recording
The Program Timer has Timer Playback and Timer Record functions.
Also, "Everyday" or "One-Time" operation can be selected. Preselect an operating time range and
contents and then select whether to operate the program or not as necessity demands.
÷ If you made a mistake during timer setting:
By turning the Jog dial and displaying "Return," you can return to the previous step and do a procedure over again.
Adjust the clock before setting the timer.
Timer operation
Adjust the clock before setting the timer.
#
(“CD Program Play”)
(“Recording Options”)
(“Tape Dubbing”)
“Sound Options”
“Clock Options”
“Sleep Timer”
“Adjust Time”
“Timer Play”
Lit
The following items can be selected by turning the
MULTI CONTROL jog dial.
The following items can be selected by turning the
MULTI CONTROL jog dial.
MENU
SELECT
SELECT