Filter
Top Products
R-K711
12
Connecting Other Accessories (Commercially Available Units)
Connecting the System
When a related system component is connected, read the instruction manual for that component also.
Ensure that all the cords are securely connected. Loose or incomplete connections may result in noise interference
or no sound at all.
z
z
Caution for outdoor antenna
installation
Since antenna installation necessitates skill and experience, always consult
your dealer before installation. The antenna should be placed at a distance
from the power distribution wires. Otherwise, an electric shock accident may
occur if the antenna falls down.
D.AUDIO IN
Connect digital audio players to the [D.AUDIO IN] terminal
on the rear panel of the main unit.
If you connect a Kenwood player that supports digital
audio link using the dedicated cable, you can control the
player from the main unit and the remote control. (P.44) It
can be connected using a 3.5 mm stereo mini-plug cable
(commercially available unit).
When you are not using the digital audio player, unplug
the mini-plug cable from the main unit.
z
z
Digital audio player
PHONO IN
Connect record players with MM cartridges to the [PHONO
IN] terminal on the rear panel of the main unit.
The [M] (earth) terminal is used to reduce noise
reduction when an analog record player is connected
to the system. It is not an earth terminal for safety
purposes.
Record players with built-in equalizer ampli ers should
be connected to the [AUX IN] terminal.
You cannot connect a record player with an MC cartridge
directly to the main unit. Connect a dedicated equalizer
ampli er to the record player and then connect it to the
[AUX IN] terminal.
z
z
z
Record player
(with MM cartridge)
Audio OUT
Signal
earth lead