Filter
Top Products
SONY MZ-B3 (E) 3-798-610-22(1)
7
Recording an MD right away!
To
Pause
Record from the
end of the
previous
recording
Record over
partway through
the previous
recording
Remove the MD
* Once you open the lid, the point to
start recording will change to the
beginning of the first track. When
recording on a recorded MD, check the
point to start recording on the display.
If the recording does not start
•Make sure the recorder is not locked
(page 21).
•Make sure the MD is not record-
protected (page 15).
The alkaline batteries' life
You can record an MD with new alkaline
batteries for 3 hours.
Display window while
recording
Record an MD.
3
Press
P*
Press P again to
resume
recording.
END SEARCH,
then press
rREC.
(, + or =
to find point to
start recording,
and press p to
stop. Then press
rREC.
p and open the
lid.*
Elapsed time of
the track being
recordedTrack number
REC
MONO
Position indicator
(shows the current
location on the MD)
Sound source
Microphone
Press rREC.
"REC" and "MONO" appear in the
display, and recording starts from
the beginning of the disc. The level
of the recorded sound is adjusted
automatically.
To stop recording, press p (stop).
"Toc Edit" flashes to store data of the
recording (the track’s start and end
points, etc.). Do not move or jog the
recorder or disconnect the power
source while the indication is flashing
in the display. When the recorder
completes storing the data, the r REC
button will be released.