SONY MZ-B3 (E) 3-798-610-22(1)
30
For Customers in the USA
DISPOSAL OF MANGANESE
DIOXIDE LITHIUM BATTERY AND
LITHIUM ION BATTERY.
MANGANESE DIOXIDE LITHIUM
BATTERY AND LITHIUM ION
BATTERY.
DISPOSE OF PROPERLY.
You can return your unwanted
manganese dioxide lithium
batteries and lithium ion batteries
to your nearest Sony Service
Center.
Note: In some areas the disposal of
lithium ion batteries and
manganese dioxide lithium
batteries in household or business
trash may be prohibited.
For the Sony Service Center nearest
you call 1-800-222-SONY (United
States only)
Caution: Do not handle damaged
or leaking lithium ion battery and
manganese dioxide lithium battery.
To remove the manganese
dioxide lithium battery
On disposal of this product, remove
the manganese dioxide lithium battery
in the battery compartment and treat it
as mentioned above.
• Dust on the lens may prevent the
unit from operating properly. Be
sure to close the disc compartment
lid after inserting and ejecting an
MD.
Note on mechanical noise
The recorder gives out mechanical
noise while operating, which is caused
by the power-saving system of the
recorder and it is not a trouble.
Notes on recording
Mechanical shock or vibration
Do not subject the recorder to strong
mechanical shock or continuous
vibration while recording. The sound
may be skipped or recording may stop.
After you stop recording, "Toc Edit"
flashes while the data of the recording
is being stored. Do not move or jog the
recorder while the indication is
flashing in the display.
Noise while recording
When you record with the built-in
microphone or an external
microphone, the sound is sent as an
analog signal, converted to a digital
signal, and recorded on an MD.
During these processes, noise may be
recorded. And when you record with
the built-in microphone in a quiet
place, mechanical noise of the recorder
may be recorded. These are not
problems.
You cannot record using a timer.
If you press the rREC button with the
power off or not connected, the button
will stay pressed down. But as soon as
the power is turned on, the button will
be released automatically. For this
reason, you cannot record using a
timer.
Remove the
battery.
Remove the
black sheet with
a pointed object.