Kenwood KRF-V7300D Stereo Receiver User Manual


 
English
61
Sound adjustment
ACTIVE EQMULTI CONTROL
/O
ENTER
ACTIVE EQ
BASS BOOST
TONE
ENTER
MULTI CONTROL
O/
ACTIVE EQ modeACTIVE EQ mode
The optimum acoustic field effect can be selected according to
the purpose of playback.
Press [ACTIVE EQ].
Each press switches the mode as follows:
Display Setting
"Active EQ Music" Effective when listening to music.
"Active EQ Cinema" Effective when watching a movie.
"Active EQ Game" Effective when playing a game.
"Active EQ Off" Active EQ function is off.
ACTIVE EQ indicator lights up.
Adjusting the ToneAdjusting the Tone
Operation available only on the remote control unit.
The tone level can be adjusted when the input signal is a PCM or
analog signal and the listen mode of this unit is set to "Stereo",
and also ACTIVE EQ mode is set to "Off".
1 Press [TONE].
2 Select whether or not the tone level is to be
adjusted.
Use [MULTI CONTROL /5] to select "Tone On" or "Tone
Off".
[ENTER]
Display Setting
"Tone On" The tone level can be adjusted. Go to step 3 after setting.
"Tone Off" The tone level is not adjusted.
3 Adjust the level of "Bass" (low frequencies).
Use [MULTI CONTROL /5] to adjust the level.
[ENTER]
The level is adjusted from –10 to +10.
4 Adjust the level of "Treble" (high frequencies).
Use [MULTI CONTROL /5] to adjust the level.
[ENTER]
The level is adjusted from –10 to +10.
Bass BoostBass Boost
Operation available only on the remote control unit.
The Bass Boost can be adjusted when the input signal is a PCM
or analog signal and the listen mode of this unit is set to "Stereo",
and also ACTIVE EQ mode is set to "Off".
Press [BASS BOOST].
Press the key once to select the maximum (+10) low
frequency emphasis setting.
TONE will automatically be turned ON.
To cancel
Press [BASS BOOST] again.
Adjusting the sound