Kenwood KRF-V7300D Stereo Receiver User Manual


 
36
KRF-V9300D/KRF-V8300D/KRF-V7300D
Setup
Manual Setup is used to set up the speakers manually or to
modify the setups made with Auto Setup.
SETUP
ENTER
MULTI CONTROL
//O/
Speaker configuration –"SP Setup"–Speaker configuration –"SP Setup"–
Select the use of each speaker and its size.
1 Enter the Manual Setup mode.
[SETUP]
Use [MULTI CONTROL 2/3] to select "Manual Setup".
[ENTER]
2 Select "SP Setup".
[MULTI CONTROL 2/3]
[ENTER]
3 Select the use and size of each speaker.
Use [MULTI CONTROL 2/3] to select the speaker.
Use [MULTI CONTROL /5] to set its use or size.
Repeat the above operations until all of the speakers have
been set up.
Speaker Display Setting
Subwoofer
"SUBW On" Subwoofer is connected.
"SUBW Off" Subwoofer is not connected.
Front speaker
"FRNT Large" Large size front speaker
"FRNT Normal" Average size front speaker
Center speaker
"CNTR Large" Large size center speaker
"CNTR Normal" Average size center speaker
"CNTR Off" Center speaker is not connected.
Surround speaker
"SURR Large" Large size surround speaker
"SURR Normal" Average size surround speaker
"SURR Off" Surround speakers are not connected.
Surround Back
speaker
"SB Largex2"
Large size surround back speakers (left
and right) are connected. (7.1ch)
"SB Largex1"
Large size surround back speaker (left
only) is connected. (6.1ch)
"SB Normalx2"
Average size surround back speakers (left
and right) are connected. (7.1ch)
"SB Normalx1"
Average size surround back speaker (left
only) is connected. (6.1ch)
"SB Off"
Surround back speakers are not
connected.
"Return" Returns to Setup Menu.
4 Press [ENTER] to enter the setting.
Reference for speaker size
"Large" : A speaker with a sufficient bass reproduction
capability (a speaker with a large woofer or a large
cabinet size).
"Normal" : A speaker with a lower bass reproduction capability
than the "Large" speakers (the bass frequencies will
be output from the speakers set to "Large" and the
subwoofer).
If you cannot identify the size of a speaker, it is recommended to
set it to "Normal".
When "SUBW Off" is selected, the front speakers are automatically
set to "FRNT Large".
For "FRNT Large" selection, no sound will be heard from
subwoofer even it is set to ON. If you set the Subwoofer Remix
to "On", you will be able to hear sound from the subwoofer. (See
<Subwoofer Remix –"Subw Re-Mix"–> °)
If "FRNT Normal" is selected, "Large" cannot be selected for the
other speakers.
If "SURR Off" is selected, no surround back speaker can be
selected.
If "SURR Normal" is selected for surround speakers, "SB Large"
cannot be selected for the surround back speakers.
Speaker setup –"Manual Setup"–