Filter
Top Products
English
39
Setup
Input assignment –"Assignment"–Input assignment –"Assignment"–
The input source for the signal output at the CD (ASSIGNABLE)
terminal can be assigned: CD, VIDEO1 or AUX.
1 Select "Assignment".
[SETUP]
[MULTI CONTROL 2/3]
[ENTER]
2 Select the input source to be assigned.
Use [MULTI CONTROL ∞/5] to select the input.
[ENTER]
Display Setting
"OPT1 CD" Assign CD as the input source
"OPT1 VIDEO1" Assign VIDEO1 as the input source
"OPT1 AUX" Assign AUX as the input source
Audio delay –"Audio Delay"–Audio delay –"Audio Delay"–
If the monitored video is delayed in time with respect to the
audio from the speakers, the audio output timing can be delayed.
1 Select "Audio Delay".
[SETUP]
[MULTI CONTROL 2/3]
[ENTER]
2 Set the delay time.
Use [MULTI CONTROL ∞/5] to select the delay time.
[ENTER]
The delay time is adjusted from 0ms to 300ms in 10ms step.