Filter
Top Products
26
Operations
Ambience effects
When the DTS signal is input: (KRF-V7030D only)
(The DTS indicator lights up.)
1 DTS surround
2 Normal stereo playback
When the analog signal or the digital signal except for the
DOLBY DIGITAL or DTS signal is input:
1 PRO LOGIC surround (The PRO LOGIC
indicator lights up.)
2 3-STEREO surround (The 3 STEREO indicator
lights up.)
3 Normal stereo playback
Adjust the volume.
3
• If a Dolby Digital signal having more channels than the maximum
number of playback channels available using the receiver’s current
settings is input, the indicator on the front panel lights
up and downmixing is performed to match the number of available
channels.
Notes
• Depending on the type of the signal or speaker setting, some listening
modes cannot be selected.
• When playback is started, the sound may be cut or interrupted before
the input source is confirmed as Dolby Digital.
• To enjoy Dolby Digital (AC-3) surround (as well as all the other listening
modes) from a single component, be sure to use a Dolby Digital (AC-
3) compatible source component. Connect the Dolby Digital (AC-3)
compatible source component's Dolby Digital (AC-3) format digital
audio signal to one of the jacks on the back of the
receiver. Connect the normal audio signal correctly to the respective
component's jacks. 890
1
DVD 6-channel playback
Using a DVD player or the like equipped with six (5.1) output channels and
the receiver, you can enjoy surround sound playback.
When you try to play a disc other than Dolby Digital (AC-3) such as DTS
CD, no sound is produced or, noise may be heard. To avoid this situation,
make sure that you connect the component to the receiver’s DVD 6CH.
INPUT jacks through a surround processor which can decode the
surround signal you wont to listen to.
Connecting a DVD player which can decode the surround signal itself is
also acceptable.
Preparations
Select “DVD/6ch” as the input source.
• If speaker system B is on when “DVD/6ch” is selected as the input
source, it switches off and speaker system A turns on automatically.
Start playback of the DVD software.
Adjust the volume.
• It is not possible individually to adjust the volume level or sound quality
( , ) of the separate channels when the receiver is in the
DVD 6ch mode. Adjust the volume with the controls of the DVD player.
For the powered subwoofer, you can adjust the volume of the
subwoofer using the subwoofer’s own volume control.
• (KRF-V5030D/V4530D only)
When you press the POWER (DVD) key and the DVD player does not
turn on, press the 1 or 2 key during pressing the POWER (DVD) key.
• Connect your DVD player to the DVD 6ch jacks of the receiver.
• Turn on all other components that will be used.
• Complete “Preparing for surround sound”. %
3
4
Select "6CH INPT" by pressing the INPUT MODE key.
2
DVD
RC-R0610
RC-R0510
INPUT SELECTOR
DVD
INPUT MODE