Kenwood KRF-V4530D Stereo Receiver User Manual


 
17
Operations
Normal playback
1
Listening to a source component
2
3
Start playback from the selected source.
1
2
3
4
5
6
7
8
9
Adjusting the sound
Adjusting the tone
You can adjust the sound quality when the receiver is in the PCM stereo
and analog stereo mode.
1
• The bass and treble levels are adjustable from -10 to +10 in 2 step
increments.
• The adjustment item is displayed for approximately 8 seconds.
Use the INPUT SELECTOR to select the source you want to
listen to.
Use the VOLUME CONTROL knob (VOLUME keys) to adjust
the volume.
2
Select this to adjust the low frequency range.
(Press the key once.)
Select this to adjust the high frequency range.
(Press the key twice.)
Once-touch low frequency emphasis (bass boost)
You can adjust the sound quality when the receiver is in the PCM stereo
and analog stereo mode.
•Press the key once to select the maximum (+10) low frequency
emphasis setting.
• This key does not function when the receiver is in the sound quality or
ambience effects adjustment mode.
Switching back to the previous setting
FM
AM
MHz
kHz
PRO LOGIC
3
DOWN MIX
DIGITAL
S.DIRECT
MONITOR
DSP
MEMO
ST.
TUNED
AUTO SOUND
AUTO
LFE
C
S
RSLS
TI.VOLB
CLIP MUTE
RDS EON PTY
TP TA NEWS
SW
L
SP A
R
STEREO
1
2
3
4
5
6
7
Selecting VIDEO 2/MONITOR (except for KRF-V7030D)
Depending on the component connected to the
jacks, select either the “ ” setting or the “ ” setting, as
appropriate. 8
VOLUME
INPUT
SELECTOR
INPUT
SELECTOR
RC-R0610
RC-R0510
INPUT SELECTOR
VOLUME CONTROL
VOLUME
VOLUME
RC-R0610
RC-R0510
SOUND
VOLUME CONTROL
SOURCE DIRECT
PHONES
SPEAKERS A/B
SOUND
MUTE
B.BOOST
MULTI
CONTROL
MULTI CONTROL
KRF-V6030D/
V5030D/
V4530D
VOLUME
SOUND
MUTE
BASS BOOST
MULTI
CONTROL