Filter
Top Products
66
Moving Around
Troubleshooting
Receiver/Tuner
I can’t receive a radio station
Check that:
• The appropriate antenna is connected. See Chapter One of the Con-
nections and Setup Guide.
• The broadcast band is correct. See “Radio Tuning” on page␣ 35 of this
manual.
• The tuner is set to the correct frequency. See “Radio Tuning” on page␣ 35
of this manual.
I can’t access any RDS (Radio Data System) functions
• Confirm that the radio station is broadcasting RDS.
• Make sure you use the Auto Memory function to store RDS stations in
memory. See “Storing RDS Stations Automatically” on page 37 of this
manual.
I’m getting a lot of static/interference
• Check whether the receiver or antenna is too close to a TV or other
electrical appliance.
• Adjust the antenna for best reception.
• If you live in an area with weak FM signals, consider a rooftop or an
amplified FM antenna (available at any home electronics store).
When I press a key to tune to a preset station, the receiver does not
respond
Check whether:
• The receiver has been unplugged for more than three days. If it has,
your settings were cleared from the receiver’s memory. See “My re-
ceiver won’t turn on and the STANDBY indicator is flashing” on
page␣ 64 of this manual.
• The Tuner input is selected. See “Radio Tuning” on page␣ 35 of this
manual.
67
Troubleshooting
Receiver/Tuner