Kenwood KRF-V7773D Stereo Receiver User Manual


 
26
Using Receiver
How Do I Adjust the Sound?
STANDBY
POWER
ON/STANDBY
-ON OFF
VOLUME CONTROL
Headphone Operation
Insert the headphone plug into the receiver’s PHONES jack and adjust
the listening level.
When listening through headphones, set SPEAKERS A and B to OFF.
27
Using Receiver
1 Tuner (frequency display)
2 CD1
3 MD/TAPE1
4 CD-R
5 VIDEO1
6 VIDEO2
7 VIDEO3
8 VIDEO4(VR-4090 only)
9 DVD
0 AV AUX
- PHONO
¤ INPUT SELECTOR ‹
TV key
TV
1 TV1
2 TV2
3 CABLE
The TV key cannot
select the input.
It can be used to
remote control TV1,
TV2 or CABLE if ,
devices are
identified at these
inputs.
Video device
MOVIE
1 VIDEO1
2 VIDEO2
3 VIDEO3
4 VIDEO4
5 DVD
6 AV AUX
If any of the above
inputs is not
identified, the next
device name will be
displayed.
Audio device
MUSIC
1 CD1
2 MD/TAPE1
3 Tuner
4 CD-R
5 PHONO
If any of the above
inputs is not
identified, the next
device name will be
displayed.
Selecting the Inputs
To select an input on the receiver:
Press one of the INPUT SELECTOR ¤/ keys. Each press changes the
input in the following order.
(VR-4080/KF-V7773D only)
Although VIDEO4 is displayed in the initial status, the receiver cannot be
switched to select VIDEO4. The VIDEO4 display will not appear after
Remote Control unit has been set up.
To select an input on Remote Control unit:
The TV-monitored device, video device and audio device can be selected
using separate keys.
To return to the previously dis-
played input, press the other
key.
Selecting the Inputs