Filter
Top Products
12
Using Receiver
How Do I Adjust the Sound?
5. Press the Next key (LCD function key 2).
6. The Treble setting menu appears.
7. Press the LCD cursor up/down (
/ ) key on Remote Control unit
to select the desired tone level.
Adjust in the range from +10 to -10.
8. To exit from setting, press the Home key (LCD function key 1).
Operation on the receiver:
1. Press the SOUND key in the door repeatedly until TONE OFF or ON
is displayed.
2. Press the MULTI CONTROL (%/fi) key to display TONE ON (or OFF
if desired so).
3. When ON is selected above and the SOUND key is pressed again, the
BASS setting menu appears.
When OFF is selected above, the LOUDNESS setting menu appears.
4. Adjust using the MULTI CONTROL (%/fi) key.
5. Press the SOUND key.
6. When the TREBLE setting menu appears, adjust the treble in the same
way as above. To exit from setting, press the SOUND key repeatedly
until “SOUND FIXED” is displayed.
13
Using Receiver
How Do I Adjust the Sound?
Adjusting the Loudness (Stereo mode only)
The Loudness control increases the bass and treble at low volume control
settings. This adjusts to the way the human ear hears sound at quiet vol-
umes, retaining music’s fullness and sparkle.
1. Press the SOUND key on Remote Control unit repeatedly until Loud-
ness = Off or On is displayed.
On or Off refers to the current setting status.
2. Press the LCD cursor up/down (
/ ) key on Remote Control unit
to select Loudness = On (or Off if desired so), then press the Home
key (LCD function key 1).
Operation on the receiver:
1. Press the SOUND key inside the door repeatedly until LOUDNESS
OFF or ON is displayed.
2. Press the MULTI CONTROL (%/fi) key to select LOUDNESS ON (or
OFF), then press the SOUND key repeatedly until “SOUND FIXED”
is displayed.
Sound
Loudness = Off
Home Next