Kenwood KOS-V500 Stereo System User Manual


 
6 KOS-V500
2WARNING
To prevent injury or fire, take the following
precautions:
• To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
• Do not watch or fix your eyes on the unit’s display
when you are driving for any extended period.
• Mounting and wiring this product requires skills and
experience. For safety’s sake, leave the mounting
and wiring work to professionals.
2CAUTION
To prevent damage to the machine, take
the following precautions:
• Make sure to ground the unit to a negative 12V DC
power supply.
• Do not install the unit in a spot exposed to direct
sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of
water splashing.
• When replacing a fuse, only use a new fuse with
the prescribed rating. Using a fuse with the wrong
rating may cause your unit to malfunction.
• Do not use your own screws. Use only the screws
provided. If you use the wrong screws, you could
damage the unit.
Safety precautions
About disc changers connected to this unit
Kenwood disc changers released in 1998 or later can
be connected to this unit.
Refer to the catalog or consult your Kenwood dealer
for connectable models of disc changers.
Note that any Kenwood disc changers released in
1997 or earlier and disc changers made by other
makers cannot be connected to this unit.
Connecting unsupported disc changers to this unit
may result in damage.
Set the "O-N" Switch to the "N" position for the
applicable Kenwood disc changers.
The functions you can use and the information
that can be displayed may differ depending on the
models being connected.
¤
You can damage both your unit and the CD changer if you
connect them incorrectly.