Filter
Top Products
English 59
Crossover Network Setup
You can set a crossover frequency of speakers.
1 Select the speaker to set the crossover
4
1
3
1
2 2
5
1 Sets the High Pass Filter of the front speaker.
2 Sets the High Pass Filter of the rear speaker.
3 Sets the Low Pass Filter of the sub woofer.
4 Switches to the crossover setup screen.
5 Returns to the original screen.
2 Display the Crossover setup screen
3 Set the crossover
6
7
8
6 Sets the cross over frequency.
7 Sets the sub woofer phase. (Only when
"Subwoofer" is set to "On" in Audio Setup
and "LPF SUB FREQ" is set to other than
"Through")
8 Returns to the original screen.
iPod Setup
Performs setup when using iPod.
1 Display the iPod SETUP screen
Touch [iPod SETUP] in the SETUP Menu
(page 58).
2 Setup each item
1
3
2
1 Sets the Audiobook playback speed.
2 Sets Wide Screen on or off.
3 Returns to the original screen.
⁄
• "Wide Screen" cannot be set while the iPod is connected.
Software Information
Checks the software version of this unit.
1 Display the Software Information screen
Touch [Software Information] in the SETUP
Menu (page 58).
Software Information
Version
xx.xx.xx
1
2
1 Displays the software version.
2 Returns to the original screen.