Filter
Top Products
XD-951/A900/A700 (En)
45
Preparation section Basic section Application section Knowledge sections
Recording preparations are required.
• •
• •
•
(Steps
1
to
3
) (For the reverse mode, select “
p
” (two-way recording).)
When the equalizer or SRS 3D is applied to the
sound, the sound with the applied effect can be re-
corded.
i
Convenient CD recording
Press the DUBBING key.
1
Set the tape length (recording time) and press the ENTER key.
4
Select “CD EDIT” and press the SET key.
Select a disc and press the SET key.
3
2
÷Even if the disc has already been selected, select the disc again.
DUBBING
Note
Note
Start edit recording.
5
ENTER
Press the ENTER Key.
1
MULTI
CONTROL
SET
2
1
MULTI
CONTROL
SET
2
ENTER
MULTI
CONTROL
Depending on the combination of conditions from CD contents (number of titles and length of the titles) and tape recording time, interruption
of a title may not be avoidable. In such a case, the respective title will not be recorded.
12
D
I
T
E
D
C
0
6
-
C
R
E
T
N
E
3
12
A
T
0
1
T
I
D
E
÷The tape and CD stop automatically when recording has completed.
÷Press the stop (7) key to stop recording in the middle.
÷If you commit an error in the time entry, restart the procedure from step
1.
Giving preference to the tape length over the title sequence
(CD EDIT)
When the tape recording time is specified, recording is ex-
ecuted with changing the title sequence so that no title
will be interrupted when the tape direction is changed at
the end of one side.
Press the CD PGM key twice to cancel CD EDIT.
Automatic editing of tape sides A and B
CD ONE TRACK RECORD (Only during CD playback)
CD RECORD
CD EDIT
CD PGM RECORD
TAPE DUBBING
(Only when the selected input is TAPE and tapes are
present in both decks A and B)
2
C
I
D
s
When Dolby Pro Logic, Dolby 3 Stereo or DSP mode is selected,
cancel it by pressing the STEREO key of the remote control unit.