Filter
Top Products
XD-951/A900/A700 (En)
31
Preparation section Application section Knowledge sectionsBasic section
CD RECORD
CD EDIT
CD PGM RECORD
TAPE DUBBING
Copying tape
(Tape dubbing)
The contents of the tape in deck A can be copied onto the
tape in deck B.
The DOLBY NR key is not active in dubbing mode. The tape recorded on deck B assumes the same Dolby NR condition as the tape played on
deck A.
Note
Note
÷The deck B will stop after creating a non-recorded portion of about
4 sec, and then the deck A will stop.
÷Dubbing can also be stopped by pressing the stop (7) key. Note that
the non-recorded space is not created in this case.
To stop dubbing
1Select the “TAPE” input.
2Press the stop key.
3Select “[” (double-side recording)
or ““” (one-side recording).
4Press the DUBBING key.
5Select “TAPE DUBBING” and press
the SET key.
6Use the same tape transport direc-
tions.
(1)Select the transport direction of
deck A.
(2)Select the transport direction of
deck B.
7Start dubbing.
Let's record
Load tapes in the decks.
Playing tape Recording tape
÷When recording is started, the tape will be transported in the direction
selected in this step.
Check the tape transport direction
indicators.
÷By selecting “RETURN” and pressing the ENTER key, the operation
returns to the previous step so the current step can be restarted.
÷Dubbing ends automatically when the side(s) to be dubbed has been
completed.
A A
INPUT
REV.MODE
DUBBING
D
U
B
B
I
E
P
A
T
MULTI
CONTROL
SET
MULTI
CONTROL
ENTER
REC/ARM
| Scrolled display
(TAPE DUBBING)
R
F
W
D
I
D
A
B DIR FWD
B DIR RVS
RETURN
A DIR FWD
A DIR RVS
1. Select. 2. Press SET.
MULTI
CONTROL
SET
1. Select. 2. Press SET.