Filter
Top Products
XD-951/A900/A700 (En)
44
Preparation sectionApplication sectionKnowledge sections
E
C
O
R
D
R
D
C
Recording preparations are required.
• •
• •
•
(Steps
1
to
3
) (For the reverse mode, select “
p
” (two-way recording).)
When the equalizer or SRS 3D is applied to the
sound, the sound with the applied effect can be re-
corded.
i
Convenient CD recording
Press the DUBBING key.
1
Start recording.
4
Select “CD RECORD”.
Select the disc.
3
2
÷Recording of CD starts at the same time as playback.
÷At the end of tape, the music is not recorded on the leader tape portion.
If you do not want any music to be interrupted in the middle, refer to
“Recording” and start recording of side B with the interrupted track.
•
MULTI
CONTROL
ENTER
÷Both the cassette deck and CD player stop.
7
DUBBING
2
C
I
D
s
1 Select.
MULTI
CONTROL
SET
Press the ENTER Key.
2 Press SET.
Perform the following operation while the CD player is in
stop mode to start recording at the same time as the start
of playback.
Recording of an entire CD
(CD RECORD)
CD RECORD
CD EDIT
CD PGM RECORD
TAPE DUBBING
(Only when the selected input is TAPE and tapes
are present in both decks A and B)
When Dolby Pro Logic, Dolby 3 Stereo or DSP mode is selected,
cancel it by pressing the STEREO key of the remote control unit.
To end recording in the middle