Kenwood VR-9060 Stereo System User Manual


 
29
EN
Ambience effects
When the Dolby Digital or Dolby Digital EX signal is input :
1 DOLBY DIGITAL : Dolby Digital surround.
2 DOLBY D EX : Dolby Digital EX surround.
3 ŸD+PLIIx MOVIE : Dolby Digital+Pro Logic IIx surround
MOVIE mode.
4 ŸD+PLIIx MUSIC : Dolby Digital+Pro Logic IIx surround
MUSIC mode.
5 PLIIx MOVIE : Dolby Pro Logic IIx surround MOVIE
mode.*
6 PLIIx MUSIC : Dolby Pro Logic IIx surround MUSIC
mode.*
7 PLIIx GAME : Dolby Pro Logic IIx surround GAME
mode.*
8 PLII MOVIE : Pro Logic II surround MOVIE mode.*
9 PLII MUSIC : Pro Logic II surround MUSIC mode.*
0 PLII GAME : Pro Logic II surround GAME mode.*
- PRO LOGIC : Pro Logic
surround.*
= STEREO : Normal stereo playback.
(* This mode can be selected only when 2 channel stereo signal
comes in.)
When you select DOLBY DIGITAL
“DOLBY DIGITAL” will be displayed.
SB
SWL
SL SR
CR
SP MUTE
AB CLIP
LFE
DIGITAL DOLBY DIGITAL STEREO
AUTO DETECT
When the DTS or DTS-ES (matrix or discrete) signal is input :
1 DTS-ES Mtrx 6.1 : DTS-ES MATRIX 6.1 channel surround.
2 DTS-ES Dscrt 6.1 : DTS-ES DISCRETE 6.1 channel surround.
3 DTS : DTS 5.1 channel surround.
4 DTS+NEO:6 Cin : DTS+Neo:6 surround CINEMA mode.
5 NEO:6 CINEMA : Neo:6 surround CINEMA mode.*
6 NEO:6 MUSIC : Neo:6 surround MUSIC mode.*
7 DTS 96/24 : DTS 96/24 playback mode.
8 STEREO : Normal stereo playback.
(* This mode can be selected only when 2 channel stereo signal
comes in.)
When the analog signal or the digital signal (except for
Dolby Digital or DTS signal) is input :
1 PLIIx MOVIE : Pro Logic IIx surround MOVIE mode.
2 PLIIx MUSIC : Pro Logic IIx surround MUSIC mode.
3 PLIIx GAME : Pro Logic IIx surround GAME mode.
4 PLII MOVIE : Pro Logic II surround MOVIE mode.
5 PLII MUSIC : Pro Logic II surround MUSIC mode.
6 PLII GAME : Pro Logic II surround GAME mode.
7 PRO LOGIC : Pro Logic surround.
8 NEO:6 CINEMA : Neo:6 surround CINEMA mode.
9 NEO:6 MUSIC : Neo:6 surround MUSIC mode.
0 STEREO :
Normal stereo playback.
• Dolby Digital or DTS signal having more channels than the maximum
number of playback channels available using the receiver’s current
settings is input, downmixing is performed to match the number of
available channels.
3
DSP mode.
DSP can produce these effects without spoiling the sound quality of
the original music or video source.
This mode can be selected when digital signals other than DOLBY
DIGITAL or DTS, or analog signal come in.
1 Pressing the DSP key or DSP MODE key will display the
current DSP MODE status.
2 Each press of the key will switch to the next status as shown
bellow:
1 ARENA : DSP surround ARENA mode.
2 JAZZ CLUB : DSP surround JAZZ CLUB mode.
3 THEATER : DSP surround THEATER mode.
4 STADIUM : DSP surround STADIUM mode.
5 DISCO : DSP surround DISCO mode.
The DSP mode selection is displayed for approximately 3 seconds.
4
Adjust the volume.
Switching the LISTEN mode to STEREO temporarily
Pressing the STEREO key changes the currently selected LISTEN mode
into STEREO. It will be changed back to the original LISTEN mode by
pressing the STEREO key again.
If the power is turned off and turned back on, or the input selector is
switched to another and switched back, the LISTEN mode will be back
to the original one.
Notes
Depending on the type of the signal or speaker setting, some listening
modes cannot be selected.
When playback is started, the sound may be cut or interrupted before
the input source is confirmed as Dolby Digital.
To enjoy Dolby Digital surround (as well as all the other listening modes)
from a single component, be sure to use a Dolby Digital compatible
source component.
05.2.7, 6:10 PM29