Filter
Top Products
36
Remote Control
Select MACRO
MACRO1
Menu
Press the MUSIC, MOVIE, or TV key to select the macro
location. (MACRO1, 2, and 3 respectively)
3
•You can store up to 3 different macros, one at each key:
MUSIC = “MACRO 1”, MOVIE = “MACRO 2 ”, TV = “MACRO 3 ”
•Pressing a key other than MUSIC, MOVIE, or TV cancels the macro
program mode.
Press the keys to be operated in order.
4
5
Press the MACRO key.
• The macro is stored at the locations specified in step 3. If another
macro was previously stored at the same location, it is erased.
Repeat steps 1 through 5 to program up to 3 macros.
This completes the macro programming procedure.
EXAMPLE:
1 Press the TV key, then press the AV POWER key to turn
on the TV.
2 Press the F. SHIFT key, then press the “3” (INPUT SEL.) key
to set the TV to the appropriate video input.
3 Press the MOVIE key to select the LD player registered at
VIDEO 2.
4 Press the AV POWER key to turn on the LD player.
This example shows you how to create a macro that; turns on the TV,
sets the TV to the appropriate input, selects the receiver's input selector
to LD, and turns on the LD player. All you have to do is insert the laser
disc!
•Make sure you start the next operation within 8 seconds of complet-
ing the previous one. If more than 8 seconds elapses between any two
steps, exit the macro programming mode.
•In order to allow verification of the remote control mode, the name of
the selected input appears in the receiver's display when the MUSIC,
MOVIE, or TV key is pressed. When the MUSIC or MOVIE key is
pressed the receiver's input also changes.
When MUSIC is pressed.
2
Press the MUSIC, MOVIE, or TV key to execute the
corresponding macro play.
1
Press the MACRO key.
•"MACRO EXE" appears in the display and the pre-programmed macro
is performed:
MUSIC = “MACRO 1”, MOVIE = “MACRO 2”, TV = “MACRO 3 ”
• Some devices take up to 1 second to power on. The macro function
has an automatic delay after any power function output.
• Pressing a key other than MUSIC, MOVIE, or TV cancels the macro
program mode.
When MUSIC is pressed.
Select MACRO
MACRO EXE
Menu
Select MACRO
MACRO1 EXE
Menu
•“MACRO EXE” appears in the display.
MACRO
MUSIC, MOVIE,
TV
+
–
+
–
During operation, make sure you start the next step within 8
seconds of completing the previous one. If more than 8
seconds elapses between any two steps, press the display
operation key so that the display appears.
Executing an automatic operation
Remote control operations
*509/33-39/EN 3/15/01, 2:17 PM36