Filter
Top Products
10
Preparations
Setting up the system
Digital connections
The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS,
Dolby Digital, or standard PCM (CD) format digital signals.
If you have connected any digital components to the receiver, be sure to read the “Input mode settings” section
carefully. 7
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO 2 or VIDEO 3 jacks. (See “Connecting video components”.)
COAXIAL DIGITAL
OUT (AUDIO)
Connect the video signal and analog
audio signals to the VIDEO 2 jacks.
(See “Connecting video compo-
nents”.) 9
Component with DTS, Dolby
Digital, or PCM OPTICAL
DIGITAL OUT
Connect the video signal and digital
audio signals to the VIDEO 3 jacks.
(See “Connecting video compo-
nents”.) 9
DOLBY DIGITAL RF
OUT (AUDIO)
COAXIAL DIGITAL OUT
(AUDIO)
OPTICAL DIGITAL OUT
(AUDIO)
LD player
PCM OUT
CD player
Component with DTS, Dolby
Digital, or PCM COAXIAL
DIGITAL OUT
Optical fiber cable
OPTICAL DIGITAL
IN (AUDIO)
MD player
OPTICAL DIGITAL OUT
(AUDIO)
L
VIDEO 3VIDEO 2VIDEO 1
S VIDEO
R
A
LC
LR
LR
B
PLAY INPLAY INPLAY INREC OUTPLAY IN
MONITOR
OUT
VIDEO 1
DVD
R
DVD
CD/DVD
OPTICAL
VIDEO 3
OPTICAL
MONITOR
OPTICAL
DIGITAL IN
DIGITAL OUT
VIDEO 2
COAXIAL
RF digital
demodulator
(DEM-9991D)
(sold separately)
*509/07-18/EN 3/15/01, 2:01 PM10