Filter
Top Products
l If you experience problems during
rnstallatron, consult your Kenwood dealer.
l If the unit does not seem to be working
right, try pressing the reset button first. If
that does not solve the problem, consult
your Kenwood dealer
l Press the reset button if the DISC auto
changer fails to operate correctly. Normal
operatin should be restored.
Reset button
l Characters in the LCD may become difficult
to read In temperatures below 41 “F (5 “Cl.
l The illustratrons of the drsplay and the panel
appearing in thus manual are examples used
to explarn more clearly how the controls are
used. Therefore, what appears on the drsplay
In the rllustratrons may doffer from what
appears on the display on the actual
equipment, and some of the illustrations on
the drsplay may represent something
rmpossrble in actual operation.
Cleaning the Faceplate Terminals
If the terminals on the unrt or faceplate get
dirty, wipe them with a dry, soft cloth.
Cleaning the Unit
If the faceplate of this unit
IS
stained, wipe It
with a dry soft cloth such as a silicon cloth
If the faceplate IS stained badly, wipe the starn
off wrth a cloth moistened with neutral
cleaner, then wipe neutral detergent off.
A
Applyrng spray cleaner drrectly to the unrt may
affect Its tnechanrcal parts Wrprng the
faceplate with a hard cloth or using a volatile
liquid such as thinner or alcohol may scratch
the surface or erases characters
Lens Fogging
Right after you turn on the car heater in cold
weather, dew or condensation may form on
the lens In the CD player of the unit. Called
lens fogging, CDs may be rmpossrble to play.
In such a situation, remove the disc and wait
for the condensation to evaporate. If the unit
still does not operate normally after a whrle,
consult your Kenwood dealer.
Cleaning the CD Slot
As dust tends to accumulate in the CD slot,
clean It every once in a while. Your CDs can
get scratched If you put them rn a dusty CD
slot.
-5-