Filter
Top Products
utton IS pressed the Tuning mode switches as
shown below.
Auto seek
“AUTO 1”
Automatic search
for a station.
indicator
Preset station
“AUTO 2”
Search in order of the stations
seek
Indicator
in the Preset memory.
Manual
-
Normal manual tuning control.
Selecting the station.
1
Select tuner source
Press the [SRC] button.
Select the “TUnE” display.
2 Select the band
Press the [FM] or [AM] button.
Each time The [FM] button IS pressed It switches between the
FMI, FM2, and FM3 bands
3 Tune up or down band
Press the [144 or [))I] button.
@
During reception of
stereo stations
the “ST’ mdlcator IS ON
Putting the station in the memory.
1
Select the band
Press the [FM] or [AM] button.
2 Select the frequency to put in the memory
Press the
(1-1
or [-II button.
3 Put the frequency in the memory
Press the [#I] - [#61 button for at least 2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the memory on each [#II
- [#61 button.
Putting stations with good reception in the memory
automatically.
1
Select the band for Auto Memory Entry
Press the [FM] or [AM] button.
2 Open Auto Memory Entry
Press the [AME] button for at least 2 seconds.
When 6 statlons that can be received are put In the memory
Auto Memory Entry closes
Calling up the stations in the memory.
1
Select the band
Press the [FM1 or [AMI button.
2 Call up the station
Press the [#II - [#61 button.
-ll-