Filter
Top Products
English
|
29
Displaying the Firmware Version
Display the version of the firmware of this unit.
1 Enter Bluetooth mode
KDC-U7046BT KDC-U7046BTL
Press the [ ] button.
KDC-U6046 KDC-U6046L
Press the [FNC] button for at least 1 second.
“BT MODE” is displayed.
2 Enter Function setting mode
Press the [FNC] button.
3 Select Bluetooth Firmware update mode
The item can be selected and determined as
follows.
”Settings” ➜ “Detailed Settings” ➜ “BT F/W
Update”
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
The firmware version appears.
4 Exit Bluetooth mode
Press the [SRC] button.
⁄
• For how to update the firmware, access our web site.
www.kenwood.com/bt/information/
Function of KCA-BT200 (Optional Accessory)
Adding a voice dialing command
Add a voice tag to the phonebook for voice dialing.
You can register up to 35 voice tags.
1 Enter Bluetooth mode
Press the [FNC] button for at least 1 second.
“BT MODE” is displayed.
2 Enter Function setting mode
Press the [FNC] button.
3 Select Phonebook name edit mode
The item can be selected and determined as
follows.
”Settings” ➜ “Voice Tag” ➜ “PB Name Edit”
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
4 Search for the name to register
Turn the Control knob to select name, and then
press the [ENTER] button.
If a voice tag has already been registered for a
name, “*” is displayed before the name.
5 Select a mode
Turn the Control knob.
Display Operation
“Register” Register a voice tag.
“Check”* Play a voice tag.
“Delete”* Delete a voice tag.
* Displayed only when a name for which a voice tag has
been registered is selected.
Selecting “Register” (Regist)
6 Register a voice tag (first)
Press the [ENTER] button. When you hear a
beep, speak the voice tag within 2 seconds.
7 Confirm the voice tag (second)
Press the [ENTER] button. When you hear a
beep, speak the same voice tag again within 2
seconds.
“Completed” is displayed.
8 Exit Function setting mode
Press the [ ] button for at least 1 second.
Return to step 2. You can register another voice tag
continuously.
⁄
• If your voice cannot be recognized, a message is displayed.
(Refer to <Troubleshooting Guide> page 36)
Pressing the [ENTER] button allows you to retry voice input.
Selecting “Check” (Play)
6 Press the [ENTER] button.
Play the registered voice and return to step 2.
Selecting “Delete” (Delete)
6 Delete a voice tag
Press the [ENTER] button.
7 Turn the Control knob to select “YES”, and then
press the [ENTER] button.
Exit Bluetooth mode
Press the [SRC] button.