Filter
Top Products
English
|
17
31 Unremoved panel beep: “TDF Alarm” ➤ “ON”,
“OFF”
If you turn off the engine key of the vehicle
without removing the panel, a beep sounds for
30 seconds.
32 Chinese language setting: “Chinese” ➤ “ON”,
“OFF”
When this is set to ON, the following character
strings are displayed in Chinese:
Folder name/ File name/ Song title/ Artist name/
Album name/ KCA-BT200 (optional accessory)
Function of the KDC-U7046BT/ KDC-U6046.
33 Language setting: “Language Select” ➤
”English”, “Arabic” ,”Persian”, “Thai”
When this is set to “Arabic”, ”Persian”, or “Thai”, the
following character strings are displayed in Arabic,
Persian, or Thai:
Folder name/ File name/ Song title/ Artist name/
Album name/ KCA-BT200 (optional accessory)
Function of the KDC-U7046BTL/ KDC-U6046L.
34 Built in AUX: “Built-in AUX” ➤ “ON”, “OFF”
Sets whether to display AUX during source
selection.
35 CD Read: “CD Read” ➤ “1”, ”2”
Sets the method for reading CD.
When unable to play special format CD, set this
function to “2” to force playing. Note that some
music CDs may be unplayable even when set to
“2”.
In addition, audio files cannot be played when set
to “2”. Normally, keep this set to “1”.
1 : Automatically distinguishes between audio file
disc and music CD when playing disc.
2 : Forces playing as music CD.
36 Favorite Delete: “Favorite Delete” ➤ Preset No.,
”All”
Deletes Favorite Preset Memory.
Refer to <Deleting Favorite Preset Memory>
(page 14).
37 Built in Amp setting: “Built-in AMP” ➤ “ON”,
“OFF”
Selecting “OFF” turns off the built-in amplifier.
Turning off the built-in amplifier improves the
quality of the sound from Preout.
38 Speaker Select: “Speaker Select” ➤ “OFF”,
”5/4inch”, ”6x9/6inch”, ”O.E.M”
Fine-tuning so that the System Q value is optimal
when setting the speaker type as follows;
Speaker type Display
OFF “OFF”
For 5 & 4 in. speaker “5/4inch”
For 6 & 6x9 in. speaker “6x9/6inch”
For the OEM speaker “O.E.M”
39 Firmware Upgrade: “F/W Update #.##” ➤ “USB”,
”CD”
Upgrades the firmware.
Selecting “YES” and then pressing [ENTER] button
starts upgrading the firmware.
For how to update the firmware, access our web
site.
http://www.kenwood.com/cs/ce/
Demo Mode Settings
40 Demo Mode: “DEMO Mode” ➤ “ON”, “OFF”
Specifies whether to enable demonstration.
Function of KDC-U7046BT/ KDC-U7046BTL/ KCA-
BT200 (Optional Accessory)
Bluetooth Settings
41 Phone Selection: “Phone Selection”
Select a cell-phone subject to hands-free
connection. Refer to <Selecting the Bluetooth
device You Wish to Connect> (page 28).
42 Audio Selection: “Audio Selection”
Select the Bluetooth audio player to be
connected. Refer to <Selecting the Bluetooth
device You Wish to Connect> (page 28).
43 SMS Download: “SMS Download”
Download a short message. Refer to
<Downloading the SMS> (page 31).
44 SMS Inbox display: “SMS Inbox”
Display the received short message. Refer to
<Displaying the SMS> (page 31).
Function of KCA-BT200 (Optional Accessory).
45 Adding a voice command: “PB Name Edit”
Registers voice for voice recognition. Refer to
<Adding a voice dialing command> (page 29).
Function of KCA-BT200 (Optional Accessory).
46 Voice command category setting: “PN Type
Edit”
Registers voice to select the Phone number
category in Phonebook. Refer to <Setting a Voice
Command for Category> (page 30).
Function of KCA-BT200 (Optional Accessory).