Filter
Top Products
— 27 —
• The non-fading output/ balanced monaural output setting turns
ON each time you switch the output between balanced and
unbalanced.
• The attenuator function turns off when you switch the output
between balanced and unbalanced whilst the attenuator is on.
Turning monaural output On/Off: (during balanced output)
Hold down the NF button for one second or more to set the
function ON or OFF.
"SUB ON" is displayed when the monaural output is set ON.
Turning non-fading output On/Off: (during unbalanced output)
Hold down the NF button for one second or more to set the
function ON or OFF.
"NF ON" is displayed when the non-fading output is set ON.
Dimmer
You can dim the display.
Turning Dimmer On/Off:
Hold down the DIMMER button for one second or more to
switch dimmer on and off.
Switching settings
Press either the AM button or FM button .
The display and setting will change.
Press the MENU button to end the menu mode.
When making audio adjustments or operating menu mode, even
when this function is set to "ILLUMI OFF", the illumination is not
turning off.
NOTE
4
3
Selectable Illumination
You can switch the setting of the button illumination between
green and amber, or have the light turned off.
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until the Selectable
Illumination function appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "COLOR GREEN" or
"COLOR AMBER" or "ILLUMI OFF" in the display, indicating
that the current color is green or amber, or illumination is off,
respectively.
2
1
Touch sensor tone
This function produces a beep sound that accompanies button
operation. It can be switched on or off.
Turning the Beep On/Off:
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until the Touch sensor tone
function appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "BEEP ON" or "BEEP OFF"
in the display, indicating that the current beep setting is on or
off, respectively.
Switching settings
Press either the AM or FM button.
The display and setting will change.
Press the MENU button to end the menu mode.
The beep sound is not output from the preout jacks.
NOTE
4
3
2
1