Filter
Top Products
— 24 —
English
Disc control features
(See page 7)
Direct Track Search
Using the remote control, make direct input of the track
number that you want to listen to.
Using the numeric buttons on the remote control, enter the
number of the track that you want to listen to.
The selected track number blinks in the display for 10 seconds.
If you make no further input in the 10-second period, the
number entry mode will automatically be cancelled.
Press either the TRACK
+ or TRACK– button whilst the track
number is blinking.
The track specified in step 1 starts playing.
Cancelling Direct Track Search During Its Operation:
Press the 38 button.
You cannot use the direct track search function whilst doing track
or disc scans or using random or magazine-random play.
NOTE
2
1
Function of remote control with number/letter entry buttons
(KCA-R6A : Optional)
Direct Disc Search
Using the remote control, make direct input of the disc
number that you want to listen to.
Using the numeric buttons on the remote control, enter the
number of the disc that you want to listen to.
The selected disc number blinks in the display for 10 seconds.
If you make no further input in the 10-second period, the
number entry mode will automatically be cancelled.
• Input "0" to select disc #10.
• If you enter more than two numbers all at once, a search will be
made only of the last number entered.
NOTE
1
Function of disc changers with remote control having
number/letter entry buttons (KCA-R6A : Optional)
Press either the DISC+ or DISC– button whilst the number
inputted is blinking.
The disc specified in step 1 starts playing.
Cancelling Direct Disc Search During Its Operation:
Press the 38 button.
2
Disc Name Preset Play (DNPP)
If you have preset the name of a disc that you want to listen
to in the disc changer, you can look for it by name and start
playing it.
Press the DNPP button on the remote control.
"DNP PLAY" will appear in the display, and the disc name
preset play mode is entered.
The names of all the discs in the disc changer will appear
successively in the display for five seconds each.
Discs whose names have not been preset will appear as "NO
NAME" in the display.
• This function can only be used in disc changers that were
manufactured or sold as of 1997. Also note that some units
cannot provide a display unless the disc name preset has been
made by the unit that is playing.
• Discs in the disc changer that have never been played before
will appear as "NO ACCESS" when the disc names are
displayed. When you cannot identify a disc because of the "NO
ACCESS" display after inserting a disc magazine, try playing it
using the disc scan or a similar function to display the disc
name.
Rapid display (forward / reverse):
Press the DISC+ or DISC– button.
Pressing the DISC
+ button will rapidly display the preset
names/disc titles in order.
Pressing the DISC
– button will rapidly display the preset
names/disc titles in reverse order.
NOTE
1
Function of remote control with DNPP button
(KCA-R6A : Optional)