Kenwood KDC-PS909 CD Player User Manual


 
— 26 —
English
Other features
(See page 8)
Table of Audio Control Setting
Bass
(“BAS”)
Treble
(“TRE”)
Balance
(“BAL”)
Fader
(“FAD”)
Non-Fading
Preout Level
(“NF”)
Bass decreased.
Treble decreased.
Left channel
emphasized.
Rear channel
increased.
Non-fading sound is
reduced.
Bass increased.
Treble increased.
Front channel
increased.
Non-fading sound
emphasized.
Right channel
emphasized.
Adjustment
mode
(Display)
4 button ¢ button
Operation of Audio control button
Balanced
monaural
preout level
(“SUB”)
Monaural sound is
reduced.
Monaural sound
emphasized.
Balanced Output
You can change preouts to balanced outputs, which allows
you to reduce noise if the amplifier being connected has
balanced input. The factory default is unbalanced output.
The balanced monaural sound output can be set to either ON
or OFF. The non-fading sound output can be set to either ON
or OFF. The factory default is set to ON.
Switching balanced / unbalanced output:
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until the Balanced output
function appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "UNBALANCED" or
"BALANCED" in the display, indicating that the current output is
balanced or unbalanced, respectively.
"UNBALANCED" (Unbalanced output)
"BALANCED" (Balanced output)
The front/rear output corresponds to the L/R channels during
balanced output. The non-fading preout will change to
monaural (mono) sounds during balanced output.
Switching settings
Press either the AM or FM button.
The display and setting will change.
Press the MENU button to end the menu mode.
The audio control and volume return to factory default settings
each time you switch between balanced and unbalanced output.
NOTE
4
3
2
1
UNBALANCED BALANCED
Left Left
-
Right Right -
Left Left +
Right Right +
Left Monaural +
Right Monaural -
FRONT
REAR
NON-FADING