Filter
Top Products
— 13 —
Clean Reception System Circuit (CRSC)
Temporarily have reception switched from stereo to mono to
reduce multi-path noise when listening to the FM station.
The factory default for this function is ON.
Turning CRSC On/Off:
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until the Clean Reception
System Circuit function appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "CRSC ON" or "CRSC OFF"
in the display, indicating that the CRSC is on or off,
respectively.
Switching settings
Press either the AM or FM button.
The display and setting will change.
Press the MENU button to end the menu mode.
Strong electrical fields (such as from power lines) may cause
unstable sound quality when CRSC is turned on. In such a
situation, turn it off.
NOTE
4
3
2
1
Switching Display for Tuner
You can change the display used when listening to the radio.
Changing the Display:
Each time you press the DISP button, the display changes as
follows:
▼
Station frequency
▼
Programme Service name (during RBDS station reception) /
SNPS name (only when being preset)
▼
Radio text (only during RBDS station reception)
▼
Clock
• When receiving an RBDS station to which a name has been
preset with Station Name Preset, switching to the programme
service name/SNPS name display will result in the programme
service name being displayed with priority.
• Only when the Switching Clock display function (P.28) is on, the
clock is displayed.
• The £ indicator lights whilst the clock is displayed.
NOTE