Filter
Top Products
Switching to traffic information automatically when a traffic
bulletin starts even when you aren't listening to the radio.
Display Setting
"TI:OFF"/"TI OFF" The Traffic Information function is OFF.
"TI:ON"/"TI ON" The Traffic Information function is ON.
When it's ON, "Traffic Info" is displayed.
When a traffic bulletin starts, "Traffic Info" is displayed it and it
switches to traffic information.
•During reception of a AM station when the Traffic Information
function is turned on ON it switches to a FM station.
• During reception of traffic information the adjusted volume is
automatically remembered, and the next time it switches to traffic
information it's automatically the remembered volume.
Receiving other traffic information stations (In tuner
source)
Press the [4] or [¢] button.
Traffic information station switching can be done when listening to
the radio.
Traffic Information
Function of the KDC-X969/KDC-X869
Setting the central frequency boosted by B.M.S.
Display Setting
"AMP FRQ:Normal"/"AMP FRQ Normal" Boost with the normal
central frequency
"AMP FRQ:Low"/"AMP FRQ Low" Drop the normal central
frequency 20%
B.M.S. Frequency Offset
Function of the KDC-X969/KDC-X869
Adjust the bass boost level of the external amplifier using the
main unit.
Display Setting
"AMP Bass:Flat"/"AMP BASS Flat" Bass boost level is flat.
"AMP Bass:+6"/"AMP BASS +6" Bass boost level is low
(+6dB).
"AMP Bass:+12"/"AMP BASS +12" Bass boost level is mid
(+12dB).
"AMP Bass:+18"/"AMP BASS +18" Bass boost level is high
(+18dB).
• Refer to the catalog or instruction manual for power amplifiers that
can be controlled from this unit.
• For amplifiers there are the model that can be set from Flat to +18
dB, and the model that can be set from Flat to +12 dB.
When an amplifier that can only be set to +12 is connected to the
unit, "AMP Bass:+18"/"AMP BASS +18" won't work correctly even
if it's selected.
B.M.S. (Bass Management System)
Menu system
— 44 —
English
Toggles ON or OFF the mute control on the built-in amplifier.
Turning ON this control enhances the preout quality.
Display Setting
The built-in amplifier deactivates.
"AMP Mute:ON"/
"AMP Mute ON"
The built-in amplifier activates.
"AMP Mute:OFF"/
"AMP Mute OFF"
Built-in Amp Mute Setting <In Standby mode>
KDC-X969_U.S_r4.pg 02.12.13 4:44 PM Page 44