Filter
Top Products
Function of the KDC-X969/KDC-X869
Setting display/don't display for the System Q factors (Bass
center frequency, Bass Q factor, Bass extend, Middle center
frequency, Middle Q factor, and Treble center frequency) in
Audio control.
Display Setting
The System Q factors aren't
displayed.
"System Q:OFF"/
"System Q OFF"
The System Q factors are
displayed.
"System Q:ON"/
"System Q ON"
System Q Setting
This function sets the opening and closing operation of a panel
when a disc is inserted and when it is ejected.
Display Setting
Opens and closes the panel after
setting the angle of the control
panel to the horizontal position.
"Ejct Angle:Level"/
"Ejct Angle Level"
Opens and closes the panel while
maintaining the angle of the
control panel to the set angle.
"Ejct Angle:Slope"/
"Ejct Angle Slope"
Eject angle setting <In Standby mode>
Setting the time until the faceplate hide operation starts after the
power is turned OFF.
The faceplate can be removed only during the set time period.
Display and Setting
"Off Wait: 0sec"/"Off Wait 0sec"
"Off Wait: 3sec"/"Off Wait 3sec" (Original setting)
"Off Wait:25sec"/"Off Wait 25sec"
…
…
OFF Wait Time Setting
Dimming this unit's display automatically when the vehicle light
switch is turned ON.
Display Setting
"Dimmer:ON"/"Dimmer ON" The display dims.
"Dimmer:OFF"/"Dimmer OFF" The display doesn't dim.
Dimmer
— 43 —
Function of the KDC-X969
Selecting the display font.
1 Select Font Type Select Mode
Press the [FM] or [AM] button.
Select the "Font Select" display.
2 Select the font
Press the [4] or [¢] button.
Font Type Select
KDC-X969_U.S_r4.pg 02.12.13 4:44 PM Page 43