Filter
Top Products
8
Preparation section
L
R
AUX
IN
SPEAKERS(6–16Ω)
GND
AM
ANTENNA
FM
75Ω
+
-
LR
DIGITAL OUT
OPTICAL
DIGITAL OUT
OPTICAL
AUX
IN
L
R
System connection
Connection of other accessories
(Commercially available parts)
FM outdoor antenna
Lead the 75Ω coaxial cable con-
nected to the FM outdoor an-
tenna into the room and connect
it to the FM 75Ω terminal. Please
remove the indoor antenna after
an outdoor antenna has been in-
stalled.
Antenna adaptor
(optional)
Audio cord
POWER cord
TO WALL AC OUTLET
Audio output
VCR, Analog turntable with
built-in RIAA equalizer (optional
P-110), etc.
CAUTION
Note on Connection
Connect the components as shown in the diagram.
Only plug the power cord into a power outlet once
connections are completed.
1.In case an associated system component is connected, also read the instruction manual of the component.
2.Be sure to insert all connection cords securely. If their connections are imperfect, the sound may not be produced
or noise may interfere.
3.Before plugging or unplugging a connection cord, be sure to unplug the power cord from the wall AC outlet. If
connection cords are plugged or unplugged with the power cord left plugged in, malfunction or damage may
result.
Notes
Notes
MD recorder or DAT etc.
DIGITAL OUT jack (OPTICAL)
cap
Optical fiber cable
If necessary, remove the cap and plug the
optical fiber cable (optical)
The DIGITAL OUT jack (OPTICAL) outputs
the CD signal.
The CD signal can be recorded in digital
format by connecting a recorder to the
DIGITAL IN jack (OPTICAL).