Filter
Top Products
39
Application section
AUTO
O.T.T.
FM 87.50MHz
C
OMPLETE WE
Timer operation
Operate easy To use Timer (O.T.T.)
Playback of the selected input source starts at the specified time, and the unit is switched off after one hour. This
timer operates only once directly after setting.
Timer playback, timer recording (PROG.1, PROG.2)
With each of tahe two timer programs, a selected source can be played (or radio broadcast can be recorded) in the
previously set time period.
AI timer playback (PROG.1, PROG.2)
When timer playback starts, the volume level increases gradually until a certain level is reached.
Sleep timer (SLEEP)
The unit is turned OFF automatically after the specified period has elapsed.
Timer playback which occurs only once and only for an hour can be programmed by simply setting the
start time. The timer playback reproduces the source selected at the last time the unit is turned off at
the last set volume.
Setting the O.T.T. timer
Connect the related equipment under reference to “System connection”.
6
~
8
1 Press the menu key.
2 Rotate the volume/multi control knob to
select "TIMER SET?".
3 Press the set/demo key.
4 Rotate the volume/multi control knob to
select "O.T.T. SET?".
5 Press the set/demo key to set "O.T.T.
SET?".
6 Rotate the volume/multi control knob to
select the time of the day to start playback
or tuning (ON time).
7 Press the set/demo key to set the ON
time.
8 Reserve the timer operation.
9 Press the POWER (
) key to turn power
off (STANDBY).
÷ The standby/timer indicator lights in amber in the
standby mode.
÷ Press the remote's timer key repeatedly until
"O.T.T." lights up.
÷ When the O.T.T. timer is set while the PROG.1 or
PROG.2 timer has been set, the reservation by
the PROG.1 or PROG.2 timer is canceled.
Turning the knob switches the display contents.
1 O.T.T. SET ?
2 PROG. 1 SET ?
3 PROG. 2 SET ?
÷ After the timer has been set and power is off (timer
standby), if there is a power failure or the power cord is
unplugged from and plugged again into the power outlet,
the standby/timer indicator blinks in amber. In this case,
set the clock again.
Lights
Turning the knob switches the display contents.
TAPE RVS. ?
AUTO PRESET (or A.MEMORY ?)
(Only when the TUNER input is selected)
AUX INPUT ?
(Only when the AUX input is selected)
BALANCE ?
BACK LIGHT ?
A.P.S. SET ?
TIMER SET ?
Adjust the clock before setting the timer.°
÷ The ON time can be set in steps of 5 minutes.