Kenwood HM-332 Stereo System User Manual


 
21
Basic section
AUTO
TUNED
T
FM 87.50MHz
U
NER P-- WE
AUTO
T
FM1 87.50MHz
U
NER P-- WE
ENTER
ENTER
AUTO
M
FM 87.50MHz
E
MORY P-- WE
AUTO
M
FM 87.50MHz
E
MORY P01 WE
PGM
AUTO
/
MONO
Receiving broadcast station
One-by-one presetting
(manual preset)
(Proceed to step 2 while “MEMORY” is
lit.)
1 Press the ENTER key during reception.
2 Select one of the preset numbers from
1 to 40.
3 Press the ENTER key again.
(Repeat steps 1,2,3 to preset other
stations)
÷ If several stations are preset under the same number, the
previous memory is replaced with the latest memory
contents.
“MEMORY” lights (for approx. 20 sec.)
÷ When a key is held depressed, preset stations will be
skipped at an interval of about 0.5 second.
÷ Preset stations can be called using the number keys on
the remote control unit.
Reception band indication
Frequency display
Lights during stereo reception
The “TUNED” indicator lights
when a station is received.
Lights at the time of auto-
matic station selection.
÷ A maximum of 40 stations of the band presently being
received will be preset.
Tuning mode switching and reception mode
(Remote control unit only)
Each press alternates the mode.
1 “AUTO” lit
(Auto tuning, stereo reception)
2 “AUTO” not lit
(Manual tuning, monaural recep-
tion)
÷ Normally, use the AUTO (Auto tuning, stereo recep-
tion) mode.
Use the manual tuning mode when reception is
noisy due to weak reception. (In the manual mode,
stereo broadcasts are received in monaural.)
P.CALL