Kenwood HM-332 Stereo System User Manual


 
Basic section
20
TUNER/band
11
33
Receiving broadcast station
Up to 40 radio stations can be preset in memory.
When the “TUNER/band” key is pressed,
the unit will automatically be switched on
and reception status will be reached.
Collective presetting of stations
Preset call
Auto/manual station switching
One-by-one presetting
1. Press the tuner/band key.
Preset a radio station in memory.
1FM
2AM
2. Preset a radio station in memory (auto preset or auto memory).
÷ If radio stations have already been stored with auto preset or manual preset,
select a station using the 4P.CALL¢ key. Each press of the same key
switches the preset stations in sequence.
When ¢ is pressed: 1=2=3 ... 38=39=40=1...
When 4 is pressed: 40=39=38 ... 3=2=1=40...
Auto tuning : The next broadcasting station will be received
automatically each time this key is pressed.
Manual tuning : Press the 1TUNING¡ key repeatedly until a
station is received. Or hold either key and release
it when the frequency of the desired station is
received.
3. Tuning (Preset Call)
÷ Once stations are stored by auto preset, the present procedure is not
required from the next time, unless you move of house or re-execute
presetting of all tunable stations.
Follow the procedure in "Collective presetting of stations (auto
preset)" to preset automatically the tunable radio stations in your
area.
When no stations have been memorized
11
3
TUNING
÷ To select a preset station from the remote, use the 4P.CALL¢ key or
numeric keys.