Kenwood HM-332 Stereo System User Manual


 
26
Application section
1 Select the track.
2 Confirm the selection.
1
2
3
PGM
AUTO
/
MONO
C
-- P-01
D
KENWOOD
PGM
SET
PGM
05 P-01
CD
/
STOP
PGM
AUTO
/
MONO
CLEAR
-- P-05
CLEAR
Various CD playback features
Use the following procedure to program desired tracks in a desired order. (up to 32 tracks)
Select the CD input.
Lights
Let the “PGM” indicator light.
Select track numbers in the order you
want to play them.
Press in stop mode
Selection of tracks
Program position of the track
to be selected next.
Listening in the desired sequence
(program playback)
÷ A track can also be selected using the 4 or ¢ key.
÷ Up to 32 tracks can be programmed. When “PROGRAM
FULL” is displayed, no more tracks can be programmed.
÷ If you made a mistake, press the CLEAR key and enter
the track No. again.
÷ When a track No. is entered, the track will be added to
the end of the existing program.
÷
– : – –” is displayed when the total programmed
period has attained 100 minutes or more.
Press the numeric keys as shown below....
To select track No. 23 : 003
To select track No. 40 : 0000)
(To select more than one track,
repeat steps 1 and 2 for each
track.)
Start playback.
÷ Tracks will be played in the order they were programmed
(following the program numbers).
÷ When the 4 or ¢ key is pressed during play, the
program will jump to the preceding or the following track
respectively.
÷ When the 4 key is pressed once during playback, the
play position returns to the beginning of the current track
being played.
To stop playback
To quit the program mode
Press in stop mode
÷ Each time the key is pressed, the
last track in the program is cleared.
(P-5 has been deleted.)
Clearing tracks from the end
Clearing the program
÷ The entire program is cleared.
Press in stop mode