Filter
Top Products
HM-331 (En/T)
39
Application section
Timer operation
TUNERT+2•••
STEREO
FM
PM
A
M
MHz
kHz
BEST HITS O.T
TUNED
RANDOM
PGM
REPEAT ALL SLEEP
A.P.S.
O.T.T. PROG.
AUTOTOTALTRACK NO.
80181705
1 2
d
o
w
n
u
p
VOLUME / multi control
Adjust the clock before setting the timer.
Operate easy To use Timer (O.T.T.)
Playback of the selected input source starts at the specified time, and the unit is switched off after one hour. This
timer operates only once directly after setting.
Timer playback, timer recording (PROG.1, PROG.2)
With each of the two timer programs, a selected source can be played (or radio broadcast can be recorded) in the
previously set time period.
AI timer playback (PROG.1, PROG.2)
The volume increases gradually after start of timer playback.
Sleep timer (SLEEP)
The unit is turned OFF automatically after the specified period has elapsed.
To execute O.T.T.
Timer playback is possible simply by setting the time.
The source selected last before the unit was switched off will be played. One hour after start of timer
playback, the unit will be switched off automatically.
Setting the O.T.T.
Turning the knob switches the function as shown
in the character information display.
TAPE RVS. ?
O.T.E. ?
A. MEMORY (or A. PRESET) ?
(Only when the TUNER input is selected)
AUX LEVEL ?
(Only when the AUX input is selected)
BALANCE ?
TIMER SET ?
A.P.S. SET ?
Turning the knob switches the function as shown
in the character information display.
1 O.T.T. SET ?
2 PROG. 1 SET ?
3 PROG. 2 SET ?
1 Select the source to be played.
2 Select “TIMER SET ?” .
3 Select “O.T.T. SET ?” .
4 Set the ON time.
5 Set it.
÷ The ON time can be set in steps of 5 minutes.
÷ When the O.T.T. has been set by pressing the
“set/demo” key, the display shows “COMPLETE !”.
The time is
advanced.
The time is
returned.
ON time display
(Press the “set/demo” key while
the “?” mark is blinking.)
Blinks
Perform steps 1 and 2 in the procedure in “Activating or deactivating the O.T.T. or program timer execution”.
w
Connect the related equipment under reference to “System connection”.
6
menu
set/demo
VOLUME / multi control
set/demo
VOLUME / multi control
set/demo
2
2
2
2
2
2
2
2