Filter
Top Products
HM-331 (En/T)
34
Application section
One-touch recording (CD
=
TAPE)
The one-touch recording can record all tracks in a CD with a one-touch operation (all-track recording).
It can also record the current CD track being played from the beginning (single-track recording).
Convenient Recording Methods
3
1
2
7
CD
6
7
Make the preparations for recording.
1 Perform steps 1. to 3. of the procedure in
”Recording on TAPE”.
™
2 Insert disc in the CD player.
CD
=
TAPE
Check the current play mode of the CD player.
Start recording.
To interrupt a recording
(Recording and playback will be
stopped.)
One-touch recording (all-track recording) One-touch recording (single-track recording)
At the end of the recording
Cassette deck : Stop is executed after an unre-
corded portion of about 4 sec. has
been produced.
Be sure to put the cassette deck in stop mode
If it is in play mode, stop it. Select the desired CD track and play it.
To record other tracks using ”one-touch recording
(single-track recording)”, repeat steps 2 and 3 for
each track.
÷ When the TAPE O.T.E. or “set/demo” key is pressed
for ”One-touch recording (single-track recording)”,
the CD track being played is replayed from the begin-
ning and recording start at the same time.
Remote comtrol unit Main unit
1 Press the TAPE O.T.E. key. 1 Select “O.T.E. ?“.
2 Start recording.
O.T.E.
TAPE
menu
VOLUME / multi control
set/demo
2
2
2
2