Filter
Top Products
Preparation section
HM-331 (En/T)
11
2
2
2
2
panel
open / close
FM
300Ω
FM
75Ω
AM
GND
DIGITAL
OUT
OPTICAL
ANTENNA
AUX INPUT
+
SPEAKERS
(
6–16
Ω
)
+
–
–
+
R
L
SUPER
WOOFER
PRE OUT
MANUAL
AUTO
PANEL
OPEN/CLOSE
MANUAL AUTO
Controls and indicators
Turning the knob switches the function as shown
in the character information display.
TAPE RVS. ?
(
O.T.E. ? ›
A. MEMORY (or A. PRESET) ? ¡
(Only when the TUNER input is selected)
AUX LEVEL ?
‡
(Only when the AUX input is selected)
BALANCE ?
fl
TIMER SET ? ·
A.P.S. SET ? %
÷ The function of the control knob returns to the normal
mode when it has not been operated for 5 seconds.
* About the VOLUME/multi control (up/down) knob
After selecting the function of this knob with the
“menu” key, select the desired control item by turn-
ing the “VOLUME/multi control (up/down)” knob.
To set or enter the setting of the selected item, press
the “set/demo” key.
1 CD cover open key (0)
Press to open the CD player cover.
2 Display
3 Tape record key (TAPE rec)
£
Press to start recording. Pressing the key during recording
stops it after leaving a non-recorded space (blank) of about 4
seconds.
4 “set/demo” key
Press to set or enter an item selected with the “VOLUME/
multi control“.
Used for demonstration ON/OFF.
5 “menu” key
Press to switch the function of the “VOLUME/multi control
(up/down)” knob.
This key is also used when setting the time of the day.
6 “panel open / close” key
7 ”tape EQ” key
8 CD play/pause key (CD 6)/indicator
^
Press to select the CD input and start CD playback.
Press during CD playback to let it pause temporarily.
9 Tape play key (TAPE)/
TAPE direction indicator
0 Stop key (7)
! Cassette holder
Press the area marked “0 push OPEN” to load or eject a tape.
@ “phones” jack
Headphones with a stereo mini plug (optional) can be
connected.
# CD Skip (4, ¢)/TAPE (1, ¡) keys &)
During CD operation :
Press to skip tracks in the forward or backward direction.
During TUNER operation :
Press to receive a preset station.
During TAPE operation :
Press to search in the forward or backward direction.
$ “repeat” key ∞
Used for repeated playback of CD.
% O.T.E. key
^ “sound” key
%
Used for switching the EX.BASS play and LOUDNESS play.
& “TUNER/band” key )
The received broadcasting band is switched.
Press to select the TUNER input.
AUX input key
Press to listen to the input source connected to AUX (analog
external).
* Standby / timer indicator $
Light in standby mode of power.
Red :Normal standby mode
Orange :O.T.T. standby
:Program timer standby
Green :Power ON mode
( “VOLUME/multi control (up/down)” knob $
Normally this is used for volume adjustment.
) Remote sensor
¡ “on/standby” key
The system is switched ON and STANDBY.
*
About the REVOLVING CONTROL PANEL
menu
set/demo
VOLUME / multi control
REVOLVING CONTROL PANEL
(close state)
÷The REVOLVING CONTROL PANEL is closed when
the power supply is in STANDBY mode.
÷When the power is switched ON, the REVOLVING
CONTROL PANEL opens.
÷When the power is ON, the panel opens and closes
alternately each time the "panel open / close" key is
pressed.
AUTO MANUAL
÷When the power is ON, the panel opens and closes
alternately each time the "panel open / close" key
is pressed.