Kenwood HD-7 Stereo System User Manual


 
HD-7/EN
44
Application
Specifications
[Amplifier section]
(For U.S.A. and Canada)
Rated output power during STEREO operation (FTC)
(For U.K. and Europe)
Effective output power during STEREO operation
(1 kHz, 10% T.H.D., at 6 ) ................. 35 W + 35 W
Rated output power during STEREO operation (DIN)
(1 kHz, 0.7% T.H.D., at 6 ) ................. 25W + 25 W
Total harmonic distortion
(1 kHz, 17.5W, at 6 ) ....................................0.008%
Frequency response ........30Hz ~ 100kHz (+0dB, -3dB)
[CD player section]
Laser ....................................... Semiconductor laser
D/A Conversion...............................................................
1 Bit D/A converter achieving a 24bit resolution
Over sampling .......................................8 fs (352.8 kHz)
Frequency response .......20Hz ~ 20kHz (+0.5dB, -1dB)
Signal to noise ratio .............................................. 98dB
Digital output
Optical.......................................... -15dBm ~ -21dBm
[Tuner section]
FM tuner section
Tuning frequency range .........87.5 MHz ~ 108 MHz
AM tuner section
(For U.S.A. and Canada)
Tuning frequency range ..........530 kHz ~ 1,700 kHz
(For U.K. and Europe)
Tuning frequency range ..........531 kHz ~ 1,602 kHz
Main unit
Enclosure ... Bass-reflex type (Magnetically shielded)
Speaker configuration
Woofer ...................................... 120 mm, cone type
Tweeter..................................... 25 mm, dome type
Impedance ................................................................ 6
Maximum input power ......................................... 60 W
Dimensions....................................W: 155 mm (6-1/8”)
........................................................ H: 270 mm (10-5/8”)
........................................................ D: 263 mm (10-3/8”)
Weight (net) ................................ 4.5kg (9.9 lb) (1 piece)
KENWOOD follows a policy of continuous ad-
vancements in development. For this reason
specifications may be changed without notice.
÷ Sufficient performance may not be exhibited
at extremely cold locations (where water
freezes).
Speakers
22 watts per channel minimum RMS, both chan-
nels driven, at 6 from 40 Hz to 20 kHz with no
more than 0.7% total harmonic distortion.
[General]
Power consumption .............................................. 80 W
Dimensions............................... W: 220 mm (8-11/16”)
.................................................... H: 145 mm (5-11/16”)
.................................................... D: 356 mm (14”)
Weight (net)........................................... 5.9 kg (13.0 lb)
For your records
Record the serial number, found on the back of the unit, in
the spaces designated on the warranty card, and in the
space provided below. Refer to the model and serial
numbers whenever you call upon your dealer for informa-
tion or service on this product.
Model Serial Number