HD-7/EN
16
Basic
Basic use method
DOWN UP
VOLUME
1
POWER
2
456
789
0+10
3
SET
ENTER
DISPLAY TIME CLEAR
TUNER/BAND
AUX
/TAPE
CD
6
1
¡
4¢7
P.CALL
TUNING
DOWN
SLEEP REPEAT RANDOM P.MODE
TIMER SOUND MUTE
UP
STOP
AUTO/MONO
II
11
22
33
sound
phones
source
direct
3
2
1
MUTE
SOUND
1 Power ON (OFF)
When the power is ON and the key is pressed, the power be-
comes OFF (standby).
It takes a little time from power OFF operation until the power is
switched off.
÷ For about five seconds after power ON, mute (no sound) status is
applied for circuit protection.
One-touch operation function
When one of the following keys is operated in power OFF (standby) con-
dition, the power will be switched on, the source will be selected, and
playback will start in case of CD.
CD6 key, TUNER/BAND key, AUX/TAPE key.
2. Select the source to be listened to.
CD )
TUNER ™
AUX/TAPE ¢
L
R
30
10 5310(–dB)
DIGITAL
* The source can also be selected by pressing TUNER/BAND, CD 6, or
AUX/TAPE on the remote control. (Playback will start automatically
when CD 6 is pressed.)
3. Adjust the volume.
÷ Rapid turning produces a
large change in volume. (AI
VOLUME function)
÷ A guide value (0 to MAX) is shown on the display.
L
R
30
10 5 3 1 0(–dB)
DIGITAL
Listening through headphone
÷ Insert the headphone plug into the headphone jack.
÷ The sound from all speakers are cut off.
÷ Turn the volume/multi control knob to adjust the volume.
÷ Lower the volume before you connect or disconnect plugs.
÷ Headphone with a stereo mini plug can be connected.
Decrease
Increase