Kenwood HD-7 Stereo System User Manual


 
HD-7/EN
18
Basic
Adjusting the tone
TONE CONTROL
The low range (BASS) and the high range (TREBLE) each can be set to a desired level.
Three types of tone control can be set in advance.
TONE CONTROL setting
Main unit only
1
2
3
1 Select "TONE ?" as follows.
1 Press the "menu" key.
2 Select "TONE ?" with the
"volume/multi control"
knob.
3 Press the "set" key.
DIGITAL
2 Select "TONE 1 ?" (or 2, 3) with the "vol-
ume/multi control" knob and press the
"set" key.
3 Adjust the level for the low range (BASS)
with the volume/multi control knob and
press the "set" key.
4 Adjust the level for the high range (TREBLE)
with the volume/multi control knob and
press the "set" key.
L
R
30
10 5310(–dB)
DIGITAL
Change is made in steps of 2
from -8 to +8.
Change is made in steps of 2
from -8 to +8.
L
R
30
10 5310(–dB)
DIGITAL
÷ When the setting has been completed, re-
turn to the original display is made after dis-
play of "COMPLETE".
Listening with use of TONE CONTROL
Select and set the desired tone control setting set
in advance.
1 Press the "sound" key repeatedly to select
"TONE 1", "TONE 2" or "TONE 3".
Each press switches the modes as follows.
"N.B.1"
"N.B.2"
* "TONE 1"
* "TONE 2"
* "TONE 3"
"SOURCE DIRECT"
"SOUND MODE OFF"
* "TONE 1(2,3)" is not displayed when
"BASS" and "TREBLE" both are set to "0".
÷ To return to normal mode, press the "sound"
key repeatedly to select "SOUND MODE
OFF".
Main unit only
N.B. circuit (natural bass)
NB1 : The low range will be emphasized.
NB2 : The low range will be emphasized still further.
1 Press the "sound" key repeatedly to select
"N.B.1" or "N.B.2".
Each press switches the modes as follows.
"N.B.1"
"N.B.2"
* "TONE 1"
* "TONE 2"
* "TONE 3"
"SOURCE DIRECT"
"SOUND MODE OFF"
* "TONE 1(2,3)" is not displayed when
"BASS" and "TREBLE" both are set to "0".
÷ To return to normal mode, press the "sound"
key repeatedly to select "SOUND MODE
OFF".
Main unit only
Basic use method