Filter
Top Products
HD-7/EN
31
Application
To add a track to an existing program
1 Select the track number to be
added with the numeric keys.
2 Press the "SET" key.
Remote control unit only
12
456
789
0 +10
3
SET
÷ Up to 32 tracks can be programed. When
"PGM FULL" is displayed, no more tracks
can be programed.
÷ If you made a mistake, press the CLEAR key
and enter the track No. again.
÷ When a track No. is entered, the track will be
added to the end of the existing program.
To clear a programed track
Press in stop mode
Remote control unit only
Press in stop mode
CLEAR
÷ Each time the key is pressed, the last track
in the program is cleared.
To clear the entire program
Remote control unit only
Press in stop mode
P.MODE
Changing to the next track during play-
back of a track
4¢
P.CALL
Remote controlMain unit
÷ When the ¢ key is pressed during play-
back, play will skip to the next track in the
program.
÷ When the 4 key is pressed once during
playback, the track being played will be
played from the beginning.
Confirmation of the contents of the pro-
grammed tracks
4¢
P.CALL
Remote controlMain unit
÷ Each time a key is pressed, the programmed
tracks will be displayed sequentially.
Press in stop mode
Press the 4, ¢ keys after completion of
programming.
Various CD playback features