Filter
Top Products
D-R350 (En)
20
The following procedure allows to record a CD within the specified tape length so that no music is interrupted in the middle
at the ends of sides A and B.
Editing
1
Light the “EDIT” indicator.
Preparation
÷Load a disc in the CD player.
÷Check that the unit is in the normal play
TRACK mode.
#
÷ Set the INPUT SELECTOR to ”CD“ on the
connected device such as AV CONTROL
CENTER or receiver.
2 Set the entry.
Time
ENTER
1 Select the time.
When using the TIME key:
+10
54321
09876
1
2
3
4
5
6
7
8
9
0
+10
ENTER
When using the numeric keys:
GRC operation
RC operation
3
GRC operation
RC operation
Mode
Edit
ENTER
ENTER
: Keys and control used in the operations described on this page.
EDIT MODE
DETIDSI?C
Blinks.
÷Do this operation in the stop mode.
RC operation
Press the numeric keys as shown below...
30-minute tape : 000)
46-minute tape : 00006
GRC operation
Press the ENTER key after selecting each numeric
icon.
30-minute tape : 0ENTER, 0ENTER,
0ENTER, )ENTER
DETIDSI3CC4-6
÷Recording within 99 minutes can be specified in minutes (2 digits).
÷If you commit a mistake in time entry, press the P.MODE key and
restart the procedure from the beginning.
÷By pressing the TIME key the set time-length intervals will change in
this order:
÷The interval length can be adjusted with the skip keys 4 and ¢ in
units of one minute (to a maximum of 99 minutes).
"
46=54=60=74=90=
??
"
=
ENTER
E d i t
GRC operation
: Complete the procedure in “Basic Operations
for the Graphical Remote Control Unit (GRC)”
90
Enter the recording time of the tape.
Go to step 3 within 8 seconds.
GRC operation
RC operation
Disc Skip
ENTER
E d i t
ENTER
Select the disc.
2
Go to step 2 within 8 seconds.
If more than 8 seconds have elapsed,
press the key again.
REPEAT
DISC SKIP
EDIT MODE
➡
EDIT MODE
TIME