Kenwood NV-701 Stereo System User Manual


 
Application section
37
Listening in the desired sequence
(program playback)
Special playback options for CD
Any titles on the discs in the tray can be listened
to in the desired sequence. (Max. 32 steps)
Select the “CD” input.
1
Check that the CD player is in the
stop mode.
2
Select “CD Program Play”.
3
Enter track numbers in the order you
want to play them.
1 Select the disc.
2 Select the track.
3 Press the ENTER key.
(To select other tracks, repeat steps 1
and 2 for each of the additional tracks.)
+“Select Disc/Track No.” is scrolled in the display
÷ Even if you program a disc or track which does not exist
in the tray, it is deleted automatically in playback.
÷ Press the BACK key to return to the previous step and
restart operation from there.
÷ Up to 32 tracks can be programmed. When “Full” is
displayed, no more tracks can be programmed.
+“Press “ENTER” to Start, “MULTI” to Edit and Check”
is scrolled in the display
+“CD Program Play” is scrolled in the display
The following items can be selected by pressing the
MULTI CONTROL keys repeatedly.
“CD Program Play”
(“Recording Options”)
“Tape Options”
“Audio Options”
“Clock Options”
“Surround Setup” (NV-701 only)
If it is in play mode
Lights
MENU
DEMO
SET
ENTER
P-01 D1 T01
PGM
MULTI CONTROL
SET
MULTI CONTROL
SET
MULTI CONTROL
Continued on next page...
CD Program P
Select Disc/
P-01 D1 T??
Press "ENTER