Kenwood NV-701 Stereo System User Manual


 
12
Preparation section
Controls and indicators
1 Display #
2 TAPE ( £) key
Press to select the cassette deck and start playback.
3 TUNER (BAND) key
Press to select the tuner and switch the receiving band.
4 CD (6) key §
Press to select the CD input and start playback.
5 VOLUME CONTROL knob ¢
Use to adjust the volume.
6 SET (÷) key *fi
Press to set items when using the MULTI CONTROL
setting mode.
When the TAPE input is selected, press to start
recording. Pressing this key while recording stops it
after creating a non-recorded space (blank) of about 4
seconds.
7 MULTI CONTROL (4/¢) keys
*¶ª⁄
Use these keys to select optimum modes according to
the desired operations.
When the CD input is selected, these keys are used to
skip tracks.
When the TUNER input is selected, these keys are used
to select a station.
When the TAPE input is selected, these keys are used
to fast forward or rewind the tape.
8 ENTER key *
Press to enter settings and perform functions when
using the MULTI CONTROL setting mode.
When power is in the standby mode:
Used for displaying the time. (If this key is pressed
while a timer operation is set, the timer icon and the
timer reservation setting mode appear in the display,
then the display returns to the previous condition.)
9 7 (stop) key ¶ª
Operation key for the CD player and cassette deck.
0 MENU (DEMO) key 4*
Switches the displayed information. Press to switch
the MULTI CONTROL setting mode on and off.
When power is in the standby mode:
Use to turn the demonstration on and off.
! (ON/STANDBY) key ¢
(POWER) key (For U.S.A.)
Press to turn the power ON and put in STANDBY.
STANDBY indicator
The indicator lights up when the power is set to the
standby mode.
@ DISC SKIP key §¶
The disc for playback (or recording) is selected. This is
also used to rotate the disc tray when loading CDs onto
the disc tray.
# OPEN/CLOSE (0) key §
The disc tray is opened and closed.
$ PHONES jack ¢
For connection of headphones (optional).
% MD/DVD key (NV-301 only) ¢
Press to select input from the component connected to
the MD/DVD jacks on the rear panel.
VIDEO/6ch IN key (NV-701 only)
Press to switch between selection of the components
connected to the VIDEO 1 and VIDEO 2 related jacks on
the rear panel.
^ Disc tray §
Three discs can be stored.
& Cassette holder
Press PUSH OPEN to load or remove a tape.